The L901 combines industrial design, exceptional image quality, and high production speeds with a new ability to service and maintain the printhead “on-the-fly.” This makes the L901 perfect for long roll-to-roll print jobs or inline integration with label finishers, applicators, dispensers, and more. Produce vibrant, full-colour prints in high resolution. Large print volumes are now more economical, with five high-capacity 250ml CMYKK ink cartridges delivering an ultra-low cost per label.
The XL Unwinder/Rewinder system equips the L901 to cope with continuous, roll-to-roll label production. Easily handle rolls up to 12″ in diameter outside diameter for high-volume jobs and reduced media costs.
The L901’s Memjet VersaPass printhead technology allows for on-the-fly maintenance, which makes for perfect inline integration with dispensers, applicators, label finishers and high-volume digital label press configurations.
A stationary memjet printhead offers blazing fast print speeds of up to 18m per minute. Keep up with most high-volume jobs, whether in a continuous roll-to-roll setup or in line with a digital press.
The Plus model offers increased water and moisture resistance1.
Watershield-printed labels are significantly more resistant to the effects of prolonged moisture exposure than conventional dye-based inkjet labels. This makes the L901 Plus perfect for applications such as chilled beverages, foods, chemical or pharmaceutical products.
This new technology also produces deeper blacks, uses more responsibly sourced inks2, and helps to prolong the life of the printhead3.
1 Water resistance can be media dependent. Always test your printed label to be sure it meets your requirements.
2 Watershield™ inks do not contain chemicals that are harmful to humans or the environment.
3 Memjet tested ejection life internally and found an average above 2X printhead life. Actual results may vary due to factors such as environment and frequency of use.
|Print method:||Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips – 70,400 nozzles (6,400 per IC Chip)|
|Inks:||Dye-based, 250mL CMYKK cartridges (1.25L total) — Watershield water-resistant formula available|
|Print resolution:||1600×1600 dpi to 1600×800 dpi|
|Print speed:||6″–12″ per second (152mm–305mm)|
|Print width:||8.5″ (216mm)|
|Media types:||Compatible with a range of paper, polyester, polypropylene, and vinyl label stocks|
|Media width:||2″–9″ (50.8mm–229mm)|
|Media length:||2″–40″ (50.8mm–1016mm)|
|Thickness:||0.005″-0.01″ (0.13mm–0.3mm) including liner|
|Maximum roll diameter:||10″ (250mm) with XL Unwinder/Rewinder System|
|Core diameter:||Requires 3″ (76.2mm) cardboard core|
|Media sensors:||Gap (movable), continuous, black mark|
|Die-cut label gap:||Minimum 0.125″ (3.0mm) Maximum 0.3″ (8.0mm)|
|Black mark:||0.125″ (3mm) wide, 1″ (25.4mm) long, Left side position|
|Interfaces:||USB 2.0, TCP/IP (Manual IP configuration or DHCP), GPIO available for external device control|
|Operating system:||Windows 7+ (32 and 64 bit)|
|Barcode font:||1D Barcode at least Grade B (Code39) with 10mils bar width|
|Two-dimensional code printing:||2D Barcode at least Grade B (PDF417) with 10mils cell size|
|Operating temperature:||59°–95°F (15°–35°C) at RH 20–80%|
|Storage temperature:||23°–113°F (-5°–50°C) at RH up to 85%, non-condensing at 65°|
|Overall dimensions:||18.9″ (480mm) W, 19″ (485mm) D, 21.1″ (535mm) H|
|Weight:||85 lbs. (38.5kg)|
|Rated voltage:||AC 110V – 220V, auto-sensing|
|Agency Certifications||CE, FCC, UL|
|Afinia part numbers:||L901 Standard
L901 Printer: 29698
Black Ink: 26730
Cyan Ink: 26723
Magenta Ink: 26716
Yellow Ink: 26709L901 Plus (Watershield™)
L901 Plus Printer: 32344
Black Plus Ink: 30461
Cyan Plus Ink: 30454
Magenta Plus Ink: 30447
Yellow Plus Ink: 30440
|Accessories:||XL Unwinder: 26681
XL Rewinder: 28802