03 9755 3343 info@maxteq.com.au

Cartes GT360 Series

FEATURES THAT MAKE CARTES MACHINES THE BEST IN THEIR CATEGORY

The technologies applied to the GT SERIES machines make them the best option on the market, not only for the finishing, but also for fulfilling complete high value labels with the maximum economy.

CARTES has actually developed a unique and innovative technology that allows to obtain the best results in terms of accuracy and productivity, both for short and long runs. In addition to the strength, the quality of the materials and the high precision at every speed, the GT Series offers to label market new and exclusive features such as:

1. AUTOMATIC CENTRING DEVICES

These machines are even more precise thanks to the new automatic Multi Head Positioning System (MHPS) that corrects, concurrently on each printing unit, the possible gap irregularities detected on pre-printed materials.
Each printing and die-cutting unit is automatically positioned to ensure a perfect centering and minimizing the waste of material. This also reduces the time required for the initial settings and increases the working speed.

2.ENERGY SAVING TECHNOLOGY

Through the use of the IGBT technology and the centralized management system of  drives power supply, that allows the sharing of energy between the motors during the operation of the machine. The energy released by the motors during the braking phase, is reused or even returned to the power grid. It follows an energy saving from 30 to 40%.

3.MORE SAFETY FOR THE OPERATOR

Thanks to the implementation of the security systems STO (Safe Torque Off), SS1 (Safe Stop), SBC (Safe Brake Control) and SLS (Safely Limited Speed), it is possible to obtain an effective protection of the operator, combining the safety to the practical needs required by the production.

4.INDEPENDANT TOUCH SCREEN CONTROL PANELS

Each unit is equipped with a touch screen control panel in order to ease the setting and regulation of all the parameters.

5.EXTREME MODULARITY

CARTES introduces an innovative modular assembling concept that allows to invert, replace or even add printing and die-cutting units with respect to the original configuration.
  PRODUCTIVITY  Up to 15.000 cycles/hour   SEMI-ROTARY DIE-CUTTING
  POWER SUPPLY  400 V three-phase – 50/60 Hz   CYLINDER DEVELOPMENT   566 mm (22.3 in) – Z: 179
  WEB WIDTH  360 mm – (14 in)   FORMAT   from 5 (0.2 in) to 500 mm (20 in)
  DIE-CUTTING SPEED   up to 50 m/min – 55 yd/min
  HOT STAMPING   DIE THICKNESS RANGE   from 0,2 (1/64 in) mm to 2 mm (5/64 in)
  BOX DIMENSIONS  360 x 320 mm – (14 x 12.6) in
  FLAT BED DIE-CUTTING/EMBOSSING 
  SILK SCREEN   DIE HOLDING BOX DIMENSIONS   360 x 320 mm – (14 x 12.6) in
  PRINTING AREA  360 x 320 mm – (14 x 12.6) in
  UV LAMP POWER  Stepless, from 24 to 200 W/cm   LASER DIE-CUTTING
  WORKING AREA   360 x ∞ mm – (14 in ) x ∞ in
  SEMI-ROTARY FLEXO VARNISHING
  CYLINDER DEVELOPMENT  584 mm (23 in) – Z: 184
  FORMAT  from 5 (0.2 in) to 350 mm (14 in)
  PRINTING SPEED  up to 40 m/min – 44 yd/min
  CLICHÉ THICKNESS RANGE  from 0,2 (1/64 in) mm to 2 mm (5/64 in)
  UV LAMP POWER  Stepless, from 36 to 160 W/cm

Get A Quote

Name:*

Email:*

Phone:*

Company:

City:

Message: